wood floor cupping after refinishing

The installer believes it is all. The installer believes it is all due to too much moisture in house.

How To Refinish A Hardwood Floor

Hardwood floor buckeling and cupping after refinishing with poly.

. In many cases of slight to moderate cupping eliminating the source of the water and drying out the flooring can save the floor. If not it could be permanently damage and in need of sanding and refinishing or in some cases board replacement. Scuff sand this coat with 150-grit sandpaper after the urethane dries overnight.

Wood floor cupping after refinishing. How to Fix Cupping in Hardwood Floors Ascertaining Moisture Levels. In addition the entire floor is cupping.

After about 7-10 days we noticed planks lifting in one area. We just had carpet ripped up and prefinished ash laced in to an existing. Cupping will occur when the underside of the hardwood becomes exposed to moisture.

What happens when that moisture releases from the floor and it. Remedies for Cupping. Floor popping after refinishing.

When water seeps into a plank of wood flooring the side of the board closest to the moisture will expand. Get help with your home improvement projects. Cupping that happens after refinishing could be merely a coincidence or it could be the result of an.

Wood floor cupping is unfortunately one of the most common issues that can plague hardwood floors. DO NOT sand a cupped floor. Wipe the surface of the.

My daughter and my husband refinished her hardwood floors with Minwax products and finished the job about December of. After about 4 weeks it was up to 15 planks lifting. Cupping occurs when hardwood planks bow inward creating a concave cup shape.

While both engineered and solid hardwoods can experience cupping they do so in different manners. Cupping is usually a sign of a water leak from pipes or even appliances such as a refrigerator. As weve learned wood floor cupping is caused by the expansion of the floor planks due to moisture.

Sanding a hardwood floor while it is still. Send your questions to Tom. This should be the first step you take before attempting to repair or replace all or part.

Cupping occurs when the edges of the board are higher than the center of the board. The amount of cupping will depend on the species swelling coefficient cut width thickness and the restraining forces that may be present. September 6 2014 by Wood Flooring Guy.

Apply a second coat of urethane in a similar manner to the first. A cupped wood floor occurs when flooring absorbs excessive moisture on the underside of the flooring planks causing expansion and cupping with the edges of the planks. Cupping can be prevented by addressing several.

Vacuum the dust away. Wood floor cupping is when the sides of hardwood floors are higher. Cupping Cupping can occur even with a perfectly-installed wood flooring depending on the environmental conditions and the building.

Expert Witness My Hardwood Floor Cups Looks Wavy